440-255-1500 "No Voice Mail - Just Real People"
3” base channel designed to anchor wall panels and extruded vertical members to foundation.
3” base channel designed to anchor wall panels and extruded vertical members to foundation. Base channel diverts any moisture intrusion to weep out before it can enter occupied space.
3” base channel designed to anchor wall panels and extruded vertical members to foundation. Inside leg is removable exposing a 1” chase that can be used for wiring. Can also be used as a top cap or a split receiving channel when installing wall sections in between existing posts.
3” corner channel designed for vertical support and used to connect fill panels or wall sections at 90º corners.
3” corner channel designed for vertical support and used to connect fill panels or wall sections at 45º corners.
3” corner channel designed for vertical support and used to connect fill panels or wall sections at 22.5º corners.
3” top cap designed to cap the wall system and connect the roof to the walls.
3” top cap designed to cap the wall system and connect the roof to the walls at a 3/12 slope.
3” deep wall cap designed to cap wall system and connect roof to walls. Typically used when installing walls under an existing roof.
3” receiving channel used as a starter channel at the host structure. 3” panel fits inside.
3” non thermal receiving channel can be used as a starter channel at the host structure where panels meet the structure at a 90 degree angle. 3” panel fits inside, available in White only.
Designed as a vertical support used to join wall sections together. May also be used as a raceway for electrical and will accommodate outlet and switch boxes. (UL Listed)
Designed as a vertical support used to join wall sections together. Used in conjunction with #7909 Female Column Channel.
Designed as a vertical support used to join wall sections together. Used in conjunction with #7913 Male Column Channel.
3” panel adapter slides into grooves on male and female column channels and adapts to 3” insulated panels at knee wall and transom locations.
Used as a column connector between wall sections to achieve greater wall heights or as structural support for the installation of doors.
Used to provide structural support for the installation of a sliding glass door.
3” H channel can be used as a vertical support on both sides of windows and door. It is also used as a connection between solid wall panels.
3” D.R.C. channel fits into and fills out the open area of a 3” H channel to provide a finished opening for windows or doors.
3” thick insulated wall panel. Used in 3” wall systems and is also used to build “end wings” for insulated patio roofs. Aluminum stucco finish.
3” thick insulated wall panel. Used in 3” wall systems and is also used to build “end wings” for insulated patio roofs. Laminated with durashield on both sides.
3” thick insulated wall panel. Used in 3” wall systems and is also used to build “end wings” for insulated patio roofs. Panel is laminated with stucco aluminum on one side and durashield on the other.