Extruded "J" rail is used with "J" wall mount to create a strong, adjustable hanging system for patio covers. Built in screw boss and drain. Screw boss is above the lower trough and eliminates leakage at this point. Accepts neoprene gasket, enables you to build the cover in the shop or on the ground and drop in place on the wall mount.
Extruded "J" wall mount is used with "J" hanging rail to create a strong adjustable hanging system for patio covers. Mount on wall and drop "J" rail into position. The "J" rail system enables you to build the cover in the shop or on the ground.
Extruded "G" hanging rail is used with #762 "G" wall mount. Accepts neoprene gasket tape to catch pan leaks. Has built in rear gutter, allows minor adjustment for pitch of cover. Should be assembled prior to installing on wall.
Extruded "G" wall mount is used with #761 "G" hanging rail, upper slot accepts flashing. Should be assembled with "G" rail prior to installing on wall.
"G" wall mount flasher slips into upper slot at top of wall mount, helps prevent leaking at back of cover.
Real neoprene rubber tape with adhesive backing to adhere to "J" rail which prevents leaks at the back of the cover. 3" wide x 1/4" thick. Slightly more expensive but saves time and money spent on service calls.