440-255-1500 "No Voice Mail - Just Real People"
CREST ALUMINUM PRODUCTS CO, INC
Aluminum Support Beams
#732 1½” 2pc Setback Beam
An extruded aluminum 2 pc. setback beam that adjust to the pitch of the awning. 1 1/2” posts fit inside bottom of beam.
#733 2” 2pc Setback Beam
An extruded aluminum 2 pc. setback beam that adjust to the pitch of the awning. 2” posts fit inside bottom of beam. The beams are also used with 2” screen rooms.
#733A 1½” 2pc Setback Beam
An extruded aluminum 2 pc. setback beam that adjust to the pitch of the awning. 3” posts fit inside bottom of beam. The beams are also used with 3” insulated rooms.
#730 2 ½" x 10" Aluminum C Beam
A heavy extruded aluminum C beam. .125” wall thickness, can be used as a single section or bolted “back to back” to form a strong “I” beam section. Full strength splice available.
#734 3" x 4" Aluminum I Beam
An extruded aluminum I beam. 3" wide x 4" tall Heavy .095 wall thickness.
#735 3" x 7" Aluminum I Beam
An extruded aluminum I beam. 3” wide x 7” tall Heavy .095 wall thickness. Full strength splice available
#75-TILT 2”x4” .055 Tilt Beam
An extruded aluminum support beam 2” wide and 4” tall with a sloped top to accommodate a ½” per foot pitch.
#75-CARRY 2”x5” Elite Carry Beam
An extruded aluminum support beam 2” wide and 5” tall with .093” thick walls.
#75-BEAM2PC 2” 2pc Lap Beam
A 2 piece extruded aluminum 2” wide support beam. Available in various heights to accommodate various spans.
#75-BEAM Elite 2000 2.625” Carry Beam
Beam can be used a carry beam or as a support column. This beam incorporates a system of concealed connectors and fasteners for a clean finish.
#75-CONN Connector for Elite 2000 Beam
An extruded aluminum concealed connecting bracket used with the Elite 2000 beams.
#75-TRIM Snap Trim for Elite 2000 Beams
Trim snaps into tracks on Elite 2000 beams to conceal fastener heads. Available either Flat or Sloped. Sloped adapter accommodates a ½” per foot slope.